The Judah INSPIRE^® End Cap is an efficient solution to cap internal partition wall ends, cavity slider doors, internal balustrades and window openings.

The Judah QUIET STUD^® will now be available in a medium 20 gauge, as originally introduced in the Judah Acoustic Manual. The increased metal thickness will allow for greater wall heights.

A corridor not only provides access for occupants, but is also a semi-permanent route for many of the services required for that building (air-conditioning, cabling, pipework, etc). 

Judah’s range of acoustic hanger isolators include two new isolators to better accommodate lighter weight ceiling systems and provide the all-important Impact Sound Insulation of areas beneath trafficable floors.

The JUDAH PANTHER^® Metal Faced Access Panels (MFAPs) have changed from a Grey Primer finish to a White Primer for a more aesthetically pleasing product following installation.

The budget lock and key on Judah PANTHER^® Sound Rated Access Panels (SRAPs) with a polymer frame have changed from metal to plastic, now offering a smaller with an internal diameter of 8mm.

The new Judah DUO^® 9 Aluminium Shadowline Perimeter Trim is an addition to the Judah DUO^® Seismic Exposed Grid Ceiling System. It is made from aluminium with a powder-coated finish in tile white. 

This suspension bracket is used for suspending 121 Rod Hangers to concrete using 9mm anchors. The new Judah 249 Suspension Bracket is an addition to the KEY-LOCK^® concealed ceiling system range.

The new Judah BG05K BETAFIL^® Direct Fix Furring Channel Clip is a modified version of the Judah BG05 BETAFIL^® Double Membrane Insulation Clip.

The new Judah ARMOUR^® 1″ Furring Channel is a lightweight, cost-effective addition to the Judah KEY-LOCK^® System, which can be used in flush plasterboard applications where fire rating is not required.

Due to increasing demand, Judah has recently added ‘C’ Channel Track and Angle components that are designed for use with the 78mm Speedpanel Systems.

The Judah Double Punched Nogging Track has been designed for use with back to back stud framing and with the Judah MAXIjamb^® when it is used as a stud member.

The new Judah 238 Swivel Clip allows Rondo 129 or 308 Furring Channel to be attached to Top Cross Rail and be angled in any direction, offering Contractors flexibility during set out.

The new Judah 311D Dual Direct Fix Clip offers installers flexibility in their choice of Judah Ceiling Batten in directfix applications. The superior 311D Clip features an additional slot to also accommodate the Judah 303. 

Judah is proud to release its new range of specialized Fixing Cleats to suit our standard 50 & 75mm wide Top Hats.Top Hat Cleats enable fixing to structural steel or masonry/concrete substrates.  

Due to popular demand, Judah has re-introduced the P32 External Corner Bead into the EXANGLE^® product range. The bead will be listed as a ‘special’ made to order product in 2400, 2700 & 10ft lengths.

The Judah PANTHER^® Sound Rated Access Panel now has a magnetic catch option that offers greater security and a more visually appealing flush door.

The Judah MAXIframe^® 202 Sill/Header Bracket has been modified to ensure there is no overhang of the section that could interfere with the linings.

The new BETAGRIP^® clip range is designed, tested, and patented and improves on the original BETAFIX design with an extended plate to offer additional fixing points for the installer.

The new PANTHER^® Aluminium Manhole Frames are now available to complement Judah’s existing range of hinged access panels. The frame is simple to install and can be screwed into place. 

The new SR02 Stainless Steel Render Bead combines the popular Judah R02 render profile with high polish Stainless Steel, to produce an external cement render bead with exceptional corrosion resistance.

The Judah WHI Rubber Hanger Isolators are an effective way to reduce sound transmission through a suspended ceiling, acting as a simple buffer from the noise above.